Determination of drugs used in combined cardiovascular therapy

Cardiovascular diseases are nowadays the first cause of mortality worldwide, causing around the 30% of global deaths each year. The risk of suffering from cardiovascular illnesses is strongly related to some factors such as hypertension, high cholesterol levels, diabetes, obesity The combination of these different risk factors is known as metabolic syndrome and it is considered a pandemic due to the high prevalence worldwide. The pathology of the disorders implies a combined cardiovascular therapy with drugs which have different targets and mechanisms of action, to regulate each factor separately. The simultaneous analysis of these drugs turns interesting but it is a complex task since the determination of multiple substances with different physicochemical properties and physiological behavior is always a challenge for the analytical chemist. The complexity of the biological matrices and the difference in the expected concentrations of some analytes require the development of extremely sensitive and selective determination methods. The aim of this work is to fill the gap existing in this field of the drug analysis, developing analytical methods capable of quantifying the different drugs prescribed in combined cardiovascular therapy simultaneously. Liquid chromatography andem mass spectrometry (LCMS/MS) has been the technique of choice throughout the main part of this work, due to the high sensitivity and selectivity requirements.

Colonization and development of Oribatida mite communities (Acari: Oribatida) in the forest reclaimed limestone mine dumps

In order to study the colonization and development of moss mites (Oribatida) communities in a Scots pine forest of a reclaimed limestone mine dump in Northern Poland, 3 plots from the dump were chosen. The selected plots differed in age, 5 years old, 35 and 50 years old. From a total of 30 samples 499 mites (Acari) were extracted in Tullgren funnel from which 262 were Oribatida. Abundance (N) was analyzed in all mites and after determining the species of both, juvenile and adult stages of oribatids, the following indices were analyzed: Abundance (N), Dominance (D), Species diversity (S), Species richness (s) and Shannon’s diversity index (H). Regarding to the results obtained; oribatid mites were dominant with the highest abundance in all assemblages (Plot 1: 139 Oribatida /299 Acari. Plot 2: 40/55 and Plot 3: 83/145). Tectocepheus velatus showed a very high dominance (45,99%) in plot 1; the highest value for Shannon’s diversity index belonged to plot 3. On the other hand, juvenile’s percentage was significantly higher than adult’s percentage, especially at plot 2 (95,02%). These results made us to conclude that the high abundance of oribatids in the youngest forest is due to T. velatus’s high abundance and that plot 3 is the best habitat for mites. Finally, the high occurrence of juvenile stages requires keeping on studying the area.

Water quality assessment and characterisation of chlorophyll-a variability related to river discharges, within the southeastern Bay of Biscay : evaluation and development of chlorophyll-a algorithms for MODIS and MERIS imagery

222 p. : il.

Design and Development of a Low-Cost Optical Current Sensor

In this paper we demonstrate the design of a low-cost optical current sensor. The sensor principle is the Faraday rotation of a light beam through a magneto-optical material, SF2, when a magnetic field is present. The prototype has a high sensitivity and a high linearity for currents ranging from 0 up to 800 A. The error of the optical fibre sensor is smaller than 1% for electric currents over 175 A.

Development of appropriateness explicit criteria for cataract extraction by phacoemulsification

Background: Consensus development techniques were used in the late 1980s to create explicit criteria for the appropriateness of cataract extraction. We developed a new appropriateness of indications tool for cataract following the RAND method. We tested the validity of our panel results. Methods: Criteria were developed using a modified Delphi panel judgment process. A panel of 12 ophthalmologists was assembled. Ratings were analyzed regarding the level of agreement among panelists. We studied the influence of all variables on the final panel score using linear and logistic regression models. The explicit criteria developed were summarized by classification and regression tree analysis. Results: Of the 765 indications evaluated by the main panel in the second round, 32.9% were found appropriate, 30.1% uncertain, and 37% inappropriate. Agreement was found in 53% of the indications and disagreement in 0.9%. Seven variables were considered to create the indications and divided into three groups: simple cataract, with diabetic retinopathy, or with other ocular pathologies. The preoperative visual acuity in the cataractous eye and visual function were the variables that best explained the panel scoring. The panel results were synthesized and presented in three decision trees. Misclassification error in the decision trees, as compared with the panel original criteria, was 5.3%. Conclusion: The parameters tested showed acceptable validity for an evaluation tool. These results support the use of this indication algorithm as a screening tool for assessing the appropriateness of cataract extraction in field studies and for the development of practice guidelines.

An integrative view of aggressivenss in adolescence : development of a new measure and assessment of parenting and attachment effects

128 p. Retirada a solicitud de la autora 03/03/2016

Development of new applications of inductively coupled plasma mass spectrometry (ICP-MS) hyphenated with different sample introduction systems

225 p. : il. Texto en español con conclusiones en inglés

Development of catalytic methane reforming systems integrating hydrogen selective PdCu membrane modules

En la presente tesis doctoral se ha estudiado la integración del proceso de producción de hidrógeno con su purificación mediante el empleo de membranas selectivas de hidrógeno. La producción de hidrógeno se realiza empleando catalizadores no convencionales de níquel soportado sobre magnesia y alúmina en un reactor catalítico. Se analiza la actividad de los catalizadores y la producción de hidrógeno mediante distintos procesos con metano como son la oxidación parcial catalítica (OPC), OPC húmeda y reformadoLa purificación de hidrógeno se realiza en un módulo provisto de una membrana selectiva de hidrógeno de PdCu depositado en un soporte poroso cerámico. Una vez optimizada su preparación mediante deposición no electrolítica se caracterizan. Para ello se determina su permeabilidad a distintas temperaturas y realizando ciclos térmicos en atmósferas inerte y de hidrógeno, que puede fragilizar el metal. Una vez preparados los catalizadores y las membranas se integran los dos sistemas y se determinan los parámetros de operación óptimos como la presión de la línea de alimentación y el caudal de gas de arrastre en el módulo de membrana. Ambos parámetros se optimizan para lograr la máxima recuperación de hidrógeno en el módulo de membrana. Por últimos se realizan ensayos completos de producción y purificación, que permiten observar el rendimiento del sistema y también el efecto que los compuestos de la mezcla compleja alimentada a las membranas tienen en su comportamiento. Para concluir la integración de procesos se realizan ensayos añadiendo azufre de forma que el sistema sea más similar al proceso real. Esto permite también analizar el efecto del azufre tanto en los catalizadores como en las membranas.

Development of a new modelling framework to estimate the C footprint from Basque dairy farms

19 p.

CONTRIBUTION TO THE DEVELOPMENT OF INTELLIGENT CONVERSATIONAL ASSISTANTS IN AUTOMOTIVE ENVIRONMENTS

Esta tesis presenta el diseño y desarrollo del Asistente Conversacional del Automóvil, Voice User Help en inglés, un sistema conversacional basado en el paradigma pregunta-respuesta y diseñado para consultar documentación del vehículo duartne la conducción. Este trabajo recoge investigaciones realizadas en los campos de la documentación técnica, recuperación de información, procesamineto de lenguaje natural, diseñode interfaces de usuario para vehículos, experiencia del usuario y computación afectiva con el fin de crear un asistente adaptativo y dinámico que modifica su comportamiento conversacional dependiendo del estado emocional del usuario.

Development of the heterogeneous catalysts for the production of levulinic acid from furfuryl alcohol

207 p.

Analysis, optimization and development of an answer scoring system

The main contribution of this work is to analyze and describe the state of the art performance as regards answer scoring systems from the SemEval- 2013 task, as well as to continue with the development of an answer scoring system (EHU-ALM) developed in the University of the Basque Country. On the overall this master thesis focuses on finding any possible configuration that lets improve the results in the SemEval dataset by using attribute engineering techniques in order to find optimal feature subsets, along with trying different hierarchical configurations in order to analyze its performance against the traditional one versus all approach. Altogether, throughout the work we propose two alternative strategies: on the one hand, to improve the EHU-ALM system without changing the architecture, and, on the other hand, to improve the system adapting it to an hierarchical con- figuration. To build such new models we describe and use distinct attribute engineering, data preprocessing, and machine learning techniques.

Development of osteoinductive Si-based coatings to improve dental implants' performance

290 p.

Proposal and validation of methodologies for the categorisation of continuous variables in the development of prediction models

158 p.

Development of nucleic acid vaccines: use of self-amplifying RNA in lipid nanoparticles

Self-amplifying RNA or RNA replicon is a form of nucleic acid-based vaccine derived from either positive-strand or negative-strand RNA viruses. The gene sequences encoding structural proteins in these RNA viruses are replaced by mRNA encoding antigens of interest as well as by RNA polymerase for replication and transcription. This kind of vaccine has been successfully assayed with many different antigens as vaccines candidates, and has been shown to be potent in several animal species, including mice, nonhuman primates, and humans. A key challenge to realizing the broad potential of self-amplifying vaccines is the need for safe and effective delivery methods. Ideally, an RNA nanocarrier should provide protection from blood nucleases and extended blood circulation, which ultimately would increase the possibility of reaching the target tissue. The delivery system must then be internalized by the target cell and, upon receptor-mediated endocytosis, must be able to escape from the endosomal compartment into the cell cytoplasm, where the RNA machinery is located, while avoiding degradation by lysosomal enzymes. Further, delivery systems for systemic administration ought to be well tolerated upon administration. They should be safe, enabling the multiadministration treatment modalities required for improved clinical outcomes and, from a developmental point of view, production of large batches with reproducible specifications is also desirable. In this review, the concept of self-amplifying RNA vaccines and the most promising lipid-based delivery systems are discussed.